Home > Broadband SSPA up to 6GHz > Systems
Products

Solid State Broadband High Power Amplifier Subsystem 1~6GHz, 40W

Item No.: AVBR0960U46
The AVBR0960U46 is a 40W high gain Solid State Broadband High Power Amplifier System. This amplifier utilizes the latest high power RF GaN transistors and also features built in control and monitoring, with protection functions to ensure high availability. This amplifier is suitable for high power CW or Pulse system applications, Communication Modulated Signal Test( LTE&& 5G ), or EMC testing situation.
Product parameters
Modules: Subsystems
INQUIRY
Description
Features
0.9GHz-6GHz frequency range Solid-state Class AB Broadband design
Psat 46dBm Typ, 44.7dBm Min Ultra-broadband Instantaneous Bandwidth
Power gain 46dB Suitable for pulse or CW applications
50 ohm input/output impedance Small and lightweight
Built-in control, monitoring and protection circuits High reliability and ruggedness
ELECTRICAL SPECIFICATIONS(T=25℃±3℃,VAC=220V, CW ,Gain 1/2MAX,Load VSWR<1.2)
Description Symbol Min Typ Max Unit
Operating Frequency BW 0.9   6 GHz
Output Power CW* @Pin= 0dBm Psat 44.8 46   dBm
Output P1dB* CW P1dB 42 44   dBm
Power Gain @Pin= 0dBm Gp   46   dB
Power Gain Flatness @Pin=0dBm ∆Gp   ±1.5 ±2 dB
Harmonics @Pin=0dBm 2nd/3rd   -20/-25 -12/-15 dBc
Noise Figure (Optional NF   N/A   dB
Spurious Signals@Pin= 0dBm Spur   -70 -60 dBc
Small Signal Gain @Pin= -30 dBm Gss   46   dB
Small Signal Flatness @Pin= -30 dBm Gs   ±2.5 ±3.5 dB
Isolation[Disable Status] Iso   90   dB
Input VSWR VSWR_IN   1.5 1.8 /
Output VSWR VSWR_OUT   1.8   /
Gain Adjustment Range (Optional   15     dB
Third Intermodulation Third Order
2-Tone @ 34dBm/Tone, 10MHz**
IMD3
 
  -30
 
-25
 
dBc
 
Group Delay GD   15 20 nS
Supply Voltage (47~61Hz) /Single-Phase VAC 180 220/50Hz 260 V
Power Consumption @ Pout =45~46dBm PC   260 340 W
 
Note*: Fundamental Power, Harmonics are excluded.
Note**:100MHz Data is Available, please contact sales for further information.
 
 
MECHANICAL SPECIFICATIONS
Length*Width*Height[ mm ] 503 x 482.6 x132.5 ( 3U )
Weight[ Kg ] 18
RF Connector Input Type N, Female
RF Connector Output Type N, Female
RF Connector Forward Coupler (Optional) Type N, Female
DC Connector RS-232 Dsub-9, Male
AC Connector 3 WIRE A/C Power Entry
ENVIRONMENTAL SPECIFICATIONS (Design to Meet)
System Operation Temperature*1 -10 45
Storage Temperature Range -25 75
Relative-Humidity   95 %
Altitude*2 N/A    
Vibration/Shock*2 N/A    
Notes *1: System Operation Temperature can be extended to -40~65℃, Contact Sales for update.
Notes *2: Altitude/Vibration is designed with experienced considerations, but without tests and experiments, Contact Sales for experimentally verified.
LIMITS
Pin<10dBm(Input RF level without damage) Load VSWR<1.5:1 (50 Ohm )  
Pin=-5dBm Load open or short for up to 10 minutes.
Pin=0dBm Load VSWR<3:1 for continuous  operation
Thermal Degradation 55
DC INTERFACE CONNECTOR –RS-232[D-Sub 9-Pin, Male]
Pin # Description Specifications
1 GND Ground
2 SHUTDOWN Amplifier Disable: TTL Logic High (3.3V) (Internally Pulled-Low)
3 Temperature Alarm Abnormal: Logic High (3.3V) (Internally Pulled-Low)
4 Fan Alarm Abnormal: Logic High (3.3V) (Internally Pulled-Low)
5 Power Amplifier Alarm Abnormal: Logic High (3.3V) (Internally Pulled-Low)