Home > Broadband SSPA up to 6GHz > Systems
Products

Solid State Broadband High Power Amplifier Subsystem 0.7~2.7GHz, 100W

Item No.: AVBR0727U50
The AVBR0727U50 is a 100W high gain Solid State Broadband High Power Amplifier System. This amplifier utilizes the latest high power RF GaN transistors and also features built in control and monitoring, with protection functions to ensure high availability. This amplifier is suitable for high power CW or Pulse system applications, Communication Modulated Signal Test, or EMC testing situation.
Product parameters
Modules: Subsystems
INQUIRY
Description
Features
0.7GHz-2.7GHz frequency range Solid-state Class AB Broadband design
Psat 50dBm Typ Instantaneous ultra-broadband
Power gain 50dB   Suitable for Modulated Signals Test
50 ohm input/output impedance Better harmonics and Gain Flatness
Built-in control, monitoring and protection circuits High reliability and ruggedness
ELECTRICAL SPECIFICATIONS(T=25℃,AC Voltage= 220V, Load VSWR ≤ 1.2)
Description Symbol Min Typ Max Unit
Operating Frequency BW 0.7   2.7 GHz
Output Power CW* @ Pin= 0 dBm Psat 49 50   dBm
Output P1dB* CW  P1dB 48 49   dBm
Power Gain @ Rated PSAT Gp   50   dB
Power Gain Flatness @ Rated PSAT ∆Gp   ±1.3 ±1.6 dB
Harmonics @ Pout =50±0.5dBm  2nd/3rd   -20/-20 -12/-15 dBc
Noise Figure NF   8 10 dB
Spurious Signals @ Pin= 0 dBm Spur     -60 dBc
Small Signal Flatness Gs   ±1.5 ±2 dB
Isolation[Disable Status] Iso   90   dB
Input VSWR VSWR_IN   1.3 1.5 /
Output VSWR VSWR_OUT   1.5   /
Third Order Intercept Point
2-Tone @ 41dBm/Tone, 1MHz Space(If Needed, Please Contact)
 
IP3
   
+55
   
dBm
Supply Voltage (47~61Hz) /Single-Phase VAC 180 220/50Hz 260 V
Power Consumption @ Pout =50±0.5dBm PC   520 600 W
 
Note*: Fundamental Power, Harmonics are excluded. 
 
MECHANICAL SPECIFICATIONS
Cooling External Heat Sink Needed (Not Supplied)
Length*Width*Height mm 482.6 x 132.5 x 506 ( 3U )
Weight[ Kg ] 13
RF Connector Input Type N, Female
RF Connector Output Type N, Female
DC Connector RS-232 Dsub-9, Male
AC Connector 3 WIRE A/C Power Entry
ENVIRONMENTAL SPECIFICATIONS(Design to meet)
Module Operation Temperature*1 -10 55
Storage Temperature Range -25 75
Relative-Humidity   95 %
Altitude*2 N/A    
Vibration/Shock*2 N/A    
Notes *1: Module Operation Temperature can be extended to -20~65℃, Contact Sales for update.
Notes *2: Altitude /Vibration are designed with considerations, but without tests and experiments.
LIMITS
Pin<15 dBm(Input RF level without damage) Load VSWR<1.5:1 (50 Ohm )  
Pin=-3 dBm Load open or short for up to 10 minutes.
Pin=0 dBm Load VSWR<3:1 for continuous  operation
Thermal Degradation 70
     
DC INTERFACE CONNECTOR [D-Sub 9-Pin, Female]
Pin # Description Specifications
1 GND Ground
2 SHUTDOWN Amplifier Disable: TTL Logic High (3.3V) (Internally Pulled-Low)
3 Temperature Alarm Abnormal: Logic High (3.3V) (Internally Pulled-Low)
4 Fan Alarm Abnormal: Logic High (3.3V) (Internally Pulled-Low)
5 Power Amplifier Alarm Abnormal: Logic High (3.3V) (Internally Pulled-Low)
6~9 N/C No electrical connected,Reserved
 
Front Panel LED Indicators
  Description Specifications
  POWER ON GREEN:  AC-220V is POWER ON status
  ENABLE GREEN: Front Panel Button is ON status
  OVER TEMP RED: Temperature is over-limited, Amplifier shutdown
  ABNORMAL