Home > Broadband SSPA up to 18GHz > Modules
Products

Solid State Broadband High Power Amplifier 6~18GHz, 10W

Item No.: AVBR60180H40
The AVBR60180H40 is a 10W high gain Solid State Broadband High Power Amplifier. This amplifier module utilizes the latest high power RF GaN transistors and also features built in control and monitoring, with protection functions to ensure high availability. This amplifier is suitable for broadband  jamming and EMC testing.
INQUIRY
Description
Features
6GHz-18GHz frequency Range Solid-state Class AB Broadband design
Psat 40dBm type,39dBm Min. Instantaneous ultra-broadband
Power gain 40dB   Suitable for CW, and Pulse
50 ohm input/output impedance Small and light weight
Built-in control, monitoring and protection circuits     High reliability and ruggedness
ELECTRICAL SPECIFICATIONS(T=25℃,DC Voltage= 28V,Load VSWR  1.2)
Description Symbol Min Typ   Max   Unit
Operating Frequency BW 6   18 GHz
Output Power CW@ Pin=0 dBm Psat 39 40   dBm
Power Gain @ Pin=0 dBm Gp   40   dB
Power Gain Flatness @ Pin=0 dBm ∆Gp   ±2 ±2.5 dB
Harmonics @ Pin=0 dBm 2nd   15   dBc
Noise Figure[Contact Sales If needed ] NF   14   dB
Spurious Signals@ Pout =10W Spur   -65 -60 dBc
Input Return Loss S11     -10   dB
Operating Voltage VDC 26 28 30 V
Current Consumption @ Pout= 39~40 dBm IDD   2.7 3.1 A
Switching Time @ 1kHz TTL, PIN = 0dBm TON/TOFF   1 2 µs
 
 
 
MECHANICAL SPECIFICATIONS
Cooling  External  Heat Sink Needed  (Not Supplied)
Length* Width*Height[ mm ] 120*80*25
Weight[ Kg ] 0.5
RF Connector Input SMA, Female
RF Connector Output SMA, Female
RF Connector Coupler[Contact Sales If needed ] SMA, Female
 
 
 
 
ENVIRONMENTAL SPECIFICATIONS
Module Operation Temperature* -20 65
Storage Temperature Range     -25 70
Relative-Humidity   95 %
Altitude N/A    
Vibration/Shock N/A    
Notes: Altitude /Vibration are designed with considerations, Please contact our sales for update the tests and experiments.
Notes: Operation Temperature can be extended to -40~+85 ,Please contact our sales for update
LIMITS
Input RF drive level without damage Pin≤10        dBm
Load VSWR @ POUT = 37 dBm VSWR≤5:1[Design To Meet]        N/A
Load VSWR @ POUT = 39~40dBm VSWR≤3:1[Design To Meet]        N/A
Thermal Degradation 90@ heatsink [recovery@ 60]        
DC INTERFACE CONNECTOR – [D-sub, 9 Pin, Male]
Pin # Description Specifications
1 Reserved No Connection
2 Current Monitor Analog voltage relative to IDD @ 50mV/100mA
3 Temp Monitor Analog voltage relative to module temperature @ 10mV/°C
4 Reserved No Connection
5 Enable Amplifier Disable: TTL Logic High (3.3V),  Internally Pull down
(Internally Pulled-Low)
6,7 VDD +28.0VDC
8,9 GND Ground