Home > Broadband SSPA up to 6GHz > Modules
Products

Power Amplifier, 2.0~6.0 GHz, 30W

Item No.: AVBR2060H45
The AVBR2060H45 is a 30W high gain Solid State Broadband High Power Amplifier. This amplifier module utilizes the latest high power RF GaN transistors and also features built in control and monitoring, with protection functions to ensure high availability. This amplifier is suitable for broadband jamming and EMC testing.
INQUIRY
Description
ELECTRICAL SPECIFICATIONS(T=25±2℃,DC Voltage= 28V, Load VSWR  1.2)
Description Symbol Min Typ   Max   Unit
Operating Frequency BW 2   6 GHz
Output Power CW @Pin=0dBm Psat 25 30   W
Output P1dB CW P1dB 10     W
Power Gain @Pin=0dBm Gp 44 45   dB
Power Gain Flatness @Pin=0dBm ∆Gp   ±1 ±1.5 dB
Input Power for Rated PSAT PIN -2 0 2 dBm
Harmonics @Pin=0dBm 2nd/3rd   -20/-20 -15/-15 dBc
Noise Figure* NF   8 12 dB
Spurious Signals @Pin=0dBm Spur   -70 -60 dBc
Input Return Loss @Pin=-30dBm S11     -10   dB
Third Order Intercept Point
2-Tone @ 34dBm/Tone, 100kHz Spacing
 
IP3
   
+48
   
dBm
Operating Voltage VDC 26 28 30 V
Current Consumption @ Pout= 25~30W IDD   4.5 5.5 A
Switching Time @ 1kHz TTL, PIN = -2dBm TON/TOFF   2 5 µs
 
Note*: Contact Sales If this parameter is necessary.
 
MECHANICAL SPECIFICATIONS
Cooling External                      Heat Sink Needed (Not Supplied)
Length* Width*Height[ mm ] 160*120*25
Weight[ Kg ] 1.2
RF Connector Input SMA, Female
RF Connector Output SMA, Female
ENVIRONMENTAL SPECIFICATIONS (Design to Meet)
Module Operation Temperature  -20 65   
Storage Temperature Range     -25 70   
Relative-Humidity   95 %
Altitude*2 N/A    
Vibration/Shock*2 N/A    
Notes *1: Module Operation Temperature can be extended to -40~85℃, Contact Sales for update.
Notes *2: Altitude /Vibration are designed with considerations, but without tests and experiments.
LIMITS
Pin<10 dBm(Input RF level without damage) Load VSWR<1.5:1 (50 Ohm )  
Pin=0 dBm       Load VSWR<3:1 for continuous operation        
Thermal Degradation      90@ heatsink [recovery@ 60]       
 
DC INTERFACE CONNECTOR – [Hybrid D-Sub 7W2, Male]
Pin # Description Specifications
A1 GND Ground
A2 VDD 28VDC
1 CURRENT SENSE Analog voltage relative to IDD @ 100mV per Ampere
2 TEMP SENSE Analog voltage relative to Module’s Temperature @ 10 mV/°C
3 ENABLE Amplifier Enable: TTL Logic High (3.3V) (Internally Pulled-Low)
4 GND Ground
5 N/C No Connection