Home > Narrowband SSPA > Modules
Products

Narrowband Power Amplifier, 14.4~15.4 GHz, 50W

Item No.: AVNR14900H47
The AVNR14900H47 is a 50W high gain Solid State Narrowband High Power Amplifier. This amplifier module utilizes the latest high power RF GaN transistors and also features built in control and monitoring, with protection functions to ensure high availability. This amplifier is suitable for satellite jamming and Satcom.
INQUIRY
Description
Features
14.4GHz-15.4GHz frequency range Solid-state Class AB Broadband design
Psat 47dBm type, 46.5dBm Min. Instantaneous ultra-broadband
Power gain 47dB   Suitable for CW, and Pulse
50 ohm input/output impedance Small and lightweight
Built-in control, monitoring and protection circuits     High reliability and ruggedness
ELECTRICAL SPECIFICATIONS(T=25℃,DC Voltage= 28V, Load VSWR  1.2)
Description Symbol Min Typ   Max   Unit
Operating Frequency* BW 14.4   15.4 GHz
Output Power CW@ Pin=0dBm Psat 45 50   W
Power Gain @ Pin=0dBm Gp 47 48   dB
Power Gain Flatness @ Pin=0dBm ∆Gp   ±0.5 ±1.0 dB
Input Power for Rated PSAT PIN -3 0   dBm
Harmonics @ Pin=0dBm** 2nd /3rd     -40 dBc
Noise Figure NF   N/A   dB
Spurious Signals@ Pin=0dBm Spur     -60 dBc
Input Return Loss S11     -10   dB
Third Order Intercept Point***
2-Tone @ 40dBm/Tone, 100kHz Spacing
 
IP3
   
N/A
   
dBc
Operating Voltage VDC 26 28 30 V
Current Consumption @ Pout= 40W~50W IDD   8 9.5 A
Switching Time @ 1kHz TTL, Pin=0dBm TON/TOFF   2 3 µs
 
Note*: Frequency can be extended to 14.5GHz, Contact sales engineer to update.
Note**: 3rd harmonics is not tested.
Note***: IP3 or IMD3 data, please contact sales engineer.
MECHANICAL SPECIFICATIONS
Cooling External                      Heat Sink Needed (Not Supplied)
Length* Width*Height[ mm ] 170*165*25
Weight[ Kg ] 1.2       
RF Connector Input SMA, Female
RF Connector Output SMA, Female
ENVIRONMENTAL SPECIFICATIONS (Design to Meet)
Module Operation Temperature*1  -20 65   
Storage Temperature Range     -25 70   
Relative-Humidity N/A    
Altitude*2 N/A    
Vibration/Shock*2 N/A    
Notes *1: Module Operation Temperature can be extended to -45~80℃, Contact Sales for update.
Notes *1: Should Supply Adequate Heat Dissipation, Enough Fan and Heat-Sink is necessary during the Temp Test.
Notes *2: Altitude /Vibration are designed with considerations, but without tests and experiments.
 
LIMITS
Input RF drive level without damage Pin≤10        dBm
Load VSWR @ POUT =25W VSWR≤5:1[Design To Meet]        N/A
Load VSWR @ POUT =50W VSWR≤3:1[Design To Meet]        N/A
Thermal Degradation 85°C Graceful Degradation        
DC INTERFACE CONNECTOR – [Hybrid D-Sub 7-Pin, Male]
Pin # Description Specifications
A1 GND Ground
A2 VDD 28VDC
1 CURRENT SENSE Analog voltage relative to IDD @ 100mV per Ampere
2 TEMP SENSE Analog voltage relative to Module’s Temperature @ 10 mV/°C
3 ENABLE Amplifier Enable: TTL Logic High (3.3V) (Internally Pulled-Low)
4 GND Ground
5 N/C No Connection