Home > Narrowband SSPA > Modules
Products
Broadband SSPA up to 6GHz
Modules Systems
Broadband SSPA up to 18GHz
Modules Systems
Broadband SSPA up to 40GHz
Modules Systems
Narrowband SSPA
Modules Systems
Power Amplifier, 0.79~0.96 GHz, 150W
Power Amplifier, 0.79~0.96 GHz, 150W Power Amplifier, 0.79~0.96 GHz, 150W

Power Amplifier, 0.79~0.96 GHz, 150W

Item No.: AVNR875H52
The AVNR875H52 is a 150W high gain Solid State Narrowband High Power Amplifier. This amplifier module utilizes the latest high power RF LDMOS transistors and also features built in control and monitoring, with protection functions to ensure high availability. This amplifier is suitable for jamming and Modulated Signals testing.
INQUIRY
Description
Features
0.79GHz-0.96GHz frequency range Solid-state Class AB design
Psat 52 dBm type Instantaneous ultra-broadband
Power gain 52dB   Suitable for CW, and Pulse
50 ohm input/output impedance Small and lightweight
Built-in control, monitoring and protection circuits High reliability and ruggedness
ELECTRICAL SPECIFICATIONS(T=25℃,DC Voltage=28V, Load VSWR ≤1.2)
Description Symbol Min  Typ  Max Unit
Operating Frequency BW 0.79    0.96 GHz  
Output Power CW@ Pin=0 dBm Psat 150 180   W  
Power Gain @ Pin=0 dBm Gp   52   dB  
Power Gain Flatness @ Pin=0 dBm ∆Gp   ±0.5 ±1 dB  
Input Power for Rated Power PIN -1 0 1 dBm  
Harmonics @ Pin=0 dBm 2nd   -35   dBc  
Noise Figure NF   N/A   dB  
Spurious Signals@ Pin=0 dBm Spur     -60 dBc  
Input Return Loss S11   -15 -10   dB  
Third Order Intercept Point
2-Tone @ 40dBm/Tone, 100kHz Spacing		  
IP3		    
N/A		    
dBc		  
Operating Voltage VDC 26 28 30 V  
Current Consumption @ Pout= 150W IDD   13 15 A  
Switching Time @ 1kHz TTL, PIN = 0 dBm TON/TOFF   2 5 µs  
 
MECHANICAL SPECIFICATIONS
Cooling ExternalHeat Sink Needed  (Not Supplied)
Length*Width*Height[ mm ] 180*140*27
Weight[ Kg ] 1.3
RF Connector Input SMA-K, Female
RF ConnectorOutput N-K, Female
   
 
 
ENVIRONMENTAL SPECIFICATIONS (Design to Meet)
 
Module Operation Temperature -20 65 ℃
Storage Temperature Range     -25 70 ℃
Relative-Humidity N/A    
Altitude N/A    
Vibration/Shock N/A    
 
LIMITS
Input RF drive level without damage Pin≤10 dBm
Load VSWR @ POUT =100W VSWR≤5:1[Design To Meet]        N/A
Load VSWR @ POUT =150W VSWR≤3:1[Design To Meet]        N/A
Thermal Degradation 85°C Graceful Degradation ℃
DC INTERFACE CONNECTOR – [Hybrid D-Sub 7-Pin, Male]
Pin # Description Specifications
A1 GND Ground
A2 VDD 28VDC
1 CURRENT SENSE Analog voltage relative to IDD @ 100mV per Ampere
2 TEMP SENSE Analog voltage relative to Module’s Temperature @ 10 mV/°C
3 ENABLE Amplifier Enable: TTL Logic High (3.3V) (Internally Pulled-Low)
4 GND Ground
5 N/C No Connection
AmpliVisionS